INDIAN ELEVATOR TECHNOLOGY

in these post we are going to share HOW TO USE ELEVATOR WIRE ROPE BULLDOG CLIP. refer the below image for proper understanding 

the above image is related to WORK PERMIT, its is the permission authority for working at specific commercial or residential area. the work permit format is almost standard in these we have to give proper details of working. before filling keep in the mind safety officer will check all details and verify then only he/she will give permit for  work

in these checklist we have to do proper tick according to information provide in form, there is lots of details share in the form just refer the form and be prepared for it

as the name of the checklist specify these form is related to WELDING MACHINE in these we have to share details of name plate,condition of working, protection device,earthing arrangement,physical is there any issue or not etc refer the checklist form through image you will get full details

in these checklist form we have to share information regarding scaffolding as shown in the format the safety officer will inspect & then only he will give further permission for work, so be careful will fixing the scaffolding

in protective personal equipment we are going to test the material which is use for work eg - helmet , safety shoes, full body harness, gloves, goggles, ear plugs, welding sheld etc

IN THESE FORMAT WE ARE GOING TO SEE POWER TOOLS INSPECTION CHECKLIST POWER TOOL LABEL AVAILABLE OR NOT BLADE & BIT DAMAGED OR CRACKED MOVABLE GUARDS ARE FREELY OR NOT IS THERE ANY CRACKED ON POWER TOOL OR NOT MOST IMPORTANT THING IS THE POWER TOOL HAVE EARTHING WIRE OR NOT

in the below image we are going to share information regarding INSPECTION REPORT FOR LIFT INSTALLATION in a simple thing we can say PWD INSPECTION LICENCE FOR LIFT its a lift certificate which is display inside the lift in these form we have to share lots of details regarding lifts, all these form is fill by LIFT ENGINEER or PWD OFFICER(government person only) validity of lift / completion of lift name & address of lift owner / name & address of lift contractor inspection officers details basically the inspection officer check below points 1) general point  2) lift pit 3) car 4) lift shaft / cartop 5) machine room for more details on above points refer image

in FULL BODY HARNESS INSPECTION FORM we have to share each & every information regarding harness the backside & forntside information like shoulder straps, chest straps, leg straps & so on